MagdaM s.r.o. IČ: 09279555
INSTRUCTION on makink of H.HOLDER (Engl)
1. After removing it from the packaging, trace with pencil and give a cuttering graphic pattern carefully cut around the perimeter ( according to the marking _______ solid lines). Be careful not to cut out the internal spatial parts, (start from the center to the edges, to mark the part for the grooves/for bending (--------) then you can bend through solid and straight edges, e.g. a table, using a ruler, etc. Cut out and bend single parts of a single motif/pattern in the base strip of the holder, when after marking (--------) you can also prepare sharp edges with light pressure, e.g. scissors - groove (to give a grooves) After it bend these "grooves" creasing into the exact shape and fold.
2. Where the “pattern” picture shows a cutout marked with scissors ( ______ ), carefully cut and insert the opposite parts into each other (e.g. the trunk of an elephant, the Ladybok´s wings of covers into an arc, etc.). For more skilled and older children is very goog be careful with the fine, precise cut, cut-out semicircles that slide into the longitudinal cuts into each other and thus ensure the connection of the ends of the carrier belt - holder. On the longest side in front, cut the securing handle, it may be more pleasant to install an oval of Velcro. Paper carriers will accommodate small drinking -TP boxes 200 to 250ml.
3. Stick and aplacation the secure connecting elements (adhesive: Velcro, cut-out double-sided adhesive wheels/strips, studs, etc.) to the marked places. For self-adhesive connecting elements ( (Velcro), remove the protective film and, after it - to swathe the base belt of holder tightly around the drinking TP-boxes, glue and secure the ends of the carrier connections. Depending on your skills, you can also choose the cutting method and insert the little beak into the cuts → into on the other side . With this method, skip sticking the oval and other stickers, which can be used multiple times, provided that you very carefully separate the opposite sides of the Velcro oval so that they do not tear sometime up the paper´s holder. (A little children cannot to do it.)
4. TP-beverage packaging boxes are inserted into the designated lower side - in the based part of holder for boxes/flasks. For handicapped children and persons with a desibilities it is better to place them unopened on the side of the be lying belt stip of all the Holder - on the longer side towards the hole for inserting the straw and the cut-out of the hole for the straw, wrap the whole holder strip as tightly as possible around the drinking´s TP-boxes/or flasks and secure the ended´s joints (Velpco, pair cuting parts ) through on the carrier strip, the grooved one is easier to fold.
5. After inserting the TP-box´s of drinking, insert the straw into the drinking box and drink the contents - bon appetit, children.
The folded carrier and the leaning handle – almost entirely rest bay weight on one entire side of the holder, thus preventing part of the contents from being squeezed out, or deforming the TPkarton of beverage.
(The motifs of the graphics are different on intricacy for each creation, coloring, while the same principle applies to folding. The difficulty by individual development children must be chosen to match the age and mentality of each creator - Pay attention to the recommendations and the safety of children under 3 years old, especially some of parts of paper, or the empty plastic packaging. That empty dengerouse packing of goods - you give immediately from the reach of especially small children's artists. WE WISH you a lot of fun and at the same time teach yours children - drawing, cutting, folding and at the same time enjoy using holder many graphic motifs for happiness to theirs creative work. The puzzle- jigsaw is also created in a variant with a pre-cut and a part with scored - tactile for blind children, or with severely impaired vision and for children with limited movement. The instructions in the pictures are identical - similiar to the basic ones for folding children's holders with a handle of the standard basic series made of paper or PP plastic, with (colorful) graphics) and variations of paper jigsaw - cut-outs for coloring (brand: "MagdaM" ™ ( f.ex. the HOLDER s - paper/plastic)
WE WISH you a lot of fun and at the same time graphic print of Handi Holder can to teach and give a develop yours children, to given use. That is why - "MagdaM" ( czech produceing )
|
